Home › Areas
Across Greensboro and the Triad
Piedmont clay and Carolina weather are shared by all three counties, while the lots, the slopes and the age of the houses vary from one to the next.
Shady streets with old oaks, freshly graded cul-de-sacs, hillside lots and farm lanes that run a quarter mile back from the road all ask something different of new concrete. Each county page below works through those differences.
Residential concrete in Guilford County
Guilford County holds the biggest share of homes in the Triad, from early twentieth-century houses near downtown Greensboro to subdivisions still going up on former farmland in the northwest. The clay underfoot is much the same across the county. What changes is the age of the house, the size of the trees, and how the lot was graded, and those three things predict most of what a concrete project here will run into. This page looks at the county through that lens.
Residential concrete in Forsyth County
Forsyth County sits at the western edge of the Triad, and its terrain rolls a little harder than the land around Greensboro. Winston-Salem is built across ridges and stream valleys, and the suburbs in Clemmons, Lewisville and Pfafftown climb toward the Yadkin River, while the north end of the county around Rural Hall and Tobaccoville turns rural. For concrete, that means slope, access and water flow deserve extra attention. This page looks at how those conditions shape a project here.
Residential concrete in Alamance County
Alamance County sits between Greensboro and the Triangle, with the Haw River running through it and Interstates 40 and 85 cutting across its middle. Its housing ranges from old mill village homes in Burlington, Graham and Haw River to new subdivisions spreading around Mebane and Elon, with farms and rural lots to the north and south. Each of those settings asks something different of a concrete project, and this page walks through them.
Regardless of county, a short list governs whether new flatwork stays sound: packing the soil and stone hard before any concrete goes down, giving rain a clear exit, cutting joints at sensible intervals, and shielding the young surface from sun, wind and frost while it gains strength. The county pages layer on local specifics, such as old shade trees and historic blocks in Guilford County, steep drives on the Winston-Salem ridges in Forsyth County, and mill houses and river bottoms in Alamance County.
The three counties mark where most inquiries originate, not a hard line on a map. Homes just over the border in Randolph, Rockingham, Davidson or a neighboring county are welcome to write in with an address, and the contractor will say whether the drive, the truck access and the local sign-off process make the job practical.
Talk through your project
Start with the address, what you want poured or replaced, rough dimensions, and a few photos of the area and any existing concrete.